54TA
Airport
|
George P Shanks
|
Waxahachie, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024
FAA Identifier: | 54TA |
---|
Lat/Lng: | 32.2997222222, -96.8733333333 32-17-59.0000N, 096-52-24.0000W Estimated |
---|
Elevation: | 610 feet Estimated |
---|
Magnetic Variation: | 06E,(1990), [3E (2024)] |
---|
Sectional: | DALLAS-FT WORTH |
---|
From City: | 6nm S of Waxahachie |
---|
Use: | Private |
---|
Ownership: | Privately owned |
---|
Activation: | 11/1992 |
---|
Attended: | All year Every day Daylight hours |
---|
Control Tower: | no |
---|
ARTCC: | Fort Worth(ZFW)Fort Worth Center |
---|
FSS: | Fort Worth FSS(FTW) |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
Single Engine GA: | 1 |
---|
Total: | 1 |
---|
|
|
Owner: | George P. Shanks 516 Johnston Road Waxahachie, Tx 75167 (972) 268-0842 |
---|
Manager: | George P. Shanks 516 Johnston Road Waxahachie, Tx 75167 (972) 268-0842 |
---|
|
Runway 15/33
Length: | 2900 feet |
---|
Width: | 30 feet |
---|
Surface: | Grass / Sod |
---|
Surface Treatment: | NONE |
---|
|
End 15 |
End 33 |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
• | Prior Permission Requested - Call 972-268-0842 |
---|
• | Ocnl Rotorcaft Operations on NE Side of Airport. Have Been Instrd to Ground Aircraft When Full Size Aircraft Appears. Rotocraft Will not be Over Runway. |
---|
• | for Cd Contact Regional Approach at 972-615-2799. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.