74TE
Airport
Flat Top Ranch
Walnut Springs, Texas

FAA NFDC Information Effective 56-day cycle 04/03/2014 - 5/29/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:74TE
Lat/Lng: 32.0613888889, -97.7948333333
32-03-41.0000N, 097-47-41.4000W
Estimated by 3RD PARTY SURVEY on 12/05/2008
Elevation: 960 feet Surveyed by 3RD PARTY SURVEY on 12/06/2008
Magnetic Variation: 05E, (2010), [4E (2014)]
Sectional: DALLAS-FT WORTH
From City: 2nm W of Walnut Springs

Operations

Use: Private
Ownership: Privately owned
Activation: 02/1985
Control Tower: no
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
NOTAMs and Weather: FDC
Wind Indicator: Lighted
Landing Fee: no

Communications

UNICOM: 122.725

Services

Based Aircraft

Multi Engine GA: 1
Total: 1

Annual Operations

Total: 0

Ownership

Owner: Double Springs Partnership Lp
5950 Cedar Springs Road #200
Dallas, Tx 75235
214-838-3000
Manager: Louis a. Beecherl, Jr.
5950 Cedar Springs Road #200
Dalllas, Tx 75235
214-838-3000

Runways

Runways: 18/36

Runway 18/36

Length: 4191 feet
by 3Rd Party Survey on 12/05/2008
Width: 50 feet
Surface: Asphalt / Bituminous Concrete
End 18 End 36
Elevation at End: 951.6' MSL 921.4' MSL
Elevation at Touchdown Zone: 960.0' MSL 960.0' MSL
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.