Steele Farms
Hollandale, Mississippi

FAA NFDC Information Effective 56-day cycle 01/05/2017 - 3/2/2017

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:90MS (Nine-Zero-Mike-Sierra)
Lat/Lng: 33.1433333333, -91.06
33-08-36.0000N, 091-03-36.0000W
Estimated by OWNER on 05/04/2009
Elevation: 110 feet Estimated by OWNER on 05/04/2009
Magnetic Variation: [0W (2017)]
Sectional: MEMPHIS
From City: 12nm W of Hollandale


Use: Private
Airspace Analysis: CONDITIONAL
Provided VFR Operations and Pvt Use only.
Ownership: Privately owned
Activation: 04/2011
Control Tower: no
ARTCC: Memphis (ZME) Memphis Center (ZME)
FSS: Greenwood FSS (GWO)
Wind Indicator: Unlighted
Landing Fee: no



Based Aircraft

Single Engine GA: 5
Total: 5

Annual Operations

For year ending: 08/13/2008
Total: 0


Owner: Gibson Steele
90 Riverside Rd
Hollandale, Ms 38748
Manager: Charles Steele
110 Bayou Rd
Greenville, Ms 38701


Runways: 18/36

Runway 18/36

Length: 2900 feet
by Owner on 05/04/2009
Width: 80 feet
Surface: Porland Cement Concrete, Fair Condition
End 18 End 36
Right Hand Pattern: Yes  
Runway Markings: Nonstandard (Other Than Numbers Only), Runway 18/36 Basic Markings Non-Standard, No Numbers. Nonstandard (Other Than Numbers Only)
Objects:   Pole
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height:   50' AGL
Object Distance:   200' Along centerline



Additional Remarks

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.