9XS4
Airport
Mc Keon Aviation
Denison, Texas

FAA NFDC Information Effective 56-day cycle 07/24/2014 - 9/18/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:9XS4
Lat/Lng: 33.7342711111, -96.6266605556
33-44-03.3760N, 096-37-35.9780W
Estimated
Elevation: 750 feet Estimated
Magnetic Variation: 06E, (1985), [3E (2014)]
Sectional: DALLAS-FT WORTH
From City: 3nm SW of Denison

Operations

Use: Private
Ownership: Privately owned
Activation: 01/1969
Control Tower: no
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
Wind Indicator: Unlighted
Landing Fee: yes

Communications

Services

Airframe Repair: None
Powerplant Repair: None

Based Aircraft

Single Engine GA: 3
Multi Engine GA: 1
Total: 4

Annual Operations

Total: 0

Ownership

Owner: Bill Mc Keon
1173 Davy Lane
Denison, Tx 75020-8819
903-465-9279
Manager: Bill Mc Keon
1173 Davy Lane
Denison, Tx 75020-8819
903-465-9279

Runways

Runways: 18/36

Runway 18/36

Length: 1800 feet
Width: 100 feet
Surface: Grass / Sod, Good Condition
End 18 End 36
Objects: Trees Trees
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Clearance Slope: 0:1 0:1
Object Height: 35' AGL 12' AGL
Object Distance: 0' Along centerline
89' Left of centerline
0' Along centerline
95' Left of centerline

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.