| FD64
Heliport
|
Bay Pines Veterans Administration
|
|
St Petersburg, Florida
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | FD64 |
| Lat/Lng: |
27.8080811111, -82.7745461111
27-48-29.0920N, 082-46-28.3660W
Estimated
|
| Elevation: |
9 feet
Estimated
|
| Magnetic Variation: |
02W,
(1986),
[-5W (2013)]
|
| Sectional: |
MIAMI
|
| From City: |
7nm
NE of St Petersburg
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
VFR, Pvt Use only.
|
| Ownership: |
Publicly owned
|
| Activation: |
03/1986
|
| Control Tower: |
no
|
| ARTCC: |
Miami Center
(ZMA)
|
| FSS: |
Saint Petersburg FSS
(PIE)
|
| Wind Indicator: |
Unlighted
|
| Landing Fee: |
no
|
|
|
|
| Owner: |
Bay Pines Vamc
10,000 Bay Pines Blvd
Bay Pines, Fl 33744
727-398-6661
|
| Manager: |
Leland Young
Po Box 5005
Bay Pines, Fl 33744
727-398-9399
|
|
Runway H1
| Length: |
50 feet
|
| Width: |
50 feet
|
| Surface: |
Porland Cement Concrete
Rooftop.
|
| Remarks: |
Primary Helipad.
|
Runway H2
| Length: |
80 feet
|
| Width: |
56 feet
|
| Surface: |
Asphalt / Bituminous Concrete
Ground Level.
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.