| ID26
Airport
|
P And R Field
|
|
Mayfield, Idaho
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | ID26 (India-Delta-Two-Six) |
| Lat/Lng: |
43.2241666667, -115.966944444
43-13-27.0000N, 115-58-01.0000W
Estimated by OWNER on 07/23/2007
|
| Elevation: |
3125 feet
Estimated
by OWNER
on 07/23/2007
|
| Magnetic Variation: |
[14E (2013)]
|
| Sectional: |
KLAMATH FALLS
|
| From City: |
12nm
NW of Mayfield
|
| Use: |
Private
|
| Ownership: |
Privately owned
|
| Activation: |
08/2007
|
| Control Tower: |
no
|
| ARTCC: |
Salt Lake City Center
(ZLC)
|
| FSS: |
Boise FSS
(BOI)
|
| Wind Indicator: |
Unlighted
|
| Landing Fee: |
no
|
| Single Engine GA: |
8
|
| Total: |
8
|
|
|
| Owner: |
Rob Prindle and Brian Reid
11850 NW Touch and Go Avenue
Boise, Id 83716
208-899-1177
|
| Manager: |
Brian Reid
11850 NW Touch and Go Avenue
Boise, Id 83716
208-899-1177
|
|
Runway 16/34
| Length: |
2600 feet
by Owner on 07/23/2007
|
| Width: |
24 feet
|
| Surface: |
Asphalt / Bituminous Concrete, Good Condition
|
|
End 16 |
End 34 |
| Runway Markings: |
Nonstandard (Other Than Numbers Only),
Runways 16 & 34 Non-Standard Mkgs; Nrs Small.
|
Nonstandard (Other Than Numbers Only)
|
| Objects affecting Navigable Airspace (CFR part 77): |
Utility runway with a visual approach
|
Utility runway with a visual approach
|
| • | 30 Ft Powerline 100 Ft South of Runway. |
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.