| II64
Heliport
|
Universal Mine
|
|
Universal, Indiana
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | II64 (India-India-Six-Four) |
| Lat/Lng: |
39.613925, -87.4619644444
39-36-50.1300N, 087-27-43.0720W
Estimated
|
| Elevation: |
550 feet
Estimated
|
| Magnetic Variation: |
01W,
(1985),
[-3W (2013)]
|
| Sectional: |
ST LOUIS
|
| From City: |
1nm
SW of Universal
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
Provided All App/Departure from 100 to 210; Area is Marked and 30' Pole S of Pad is Lowered or Obst Lgtd; Wind Indicator is Maintained.
|
| Ownership: |
Privately owned
|
| Activation: |
02/1989
|
| Control Tower: |
no
|
| ARTCC: |
Indianapolis Center
(ZID)
|
| FSS: |
Terre Haute FSS
(HUF)
|
| Wind Indicator: |
Unlighted
|
| Landing Fee: |
no
|
|
|
|
| Owner: |
Peabody Coal Co - Univ Mine
Po Box 145
Universal, in 47884
317-832-3594
|
| Manager: |
Robert Petit
Po Box 145
Universal, in 47884
317-832-3594
|
|
Runway H1
| Length: |
12 feet
|
| Width: |
12 feet
|
| Surface: |
Porland Cement Concrete
|
| • | (A52) Powerlines 1000' W. |
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.