SD26
Heliport
Mike Jacob Sturgis
Sturgis, South Dakota

FAA NFDC Information Effective 56-day cycle 09/18/2014 - 11/13/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:SD26
Lat/Lng: 44.4168, -103.450166667
44-25-00.4800N, 103-27-00.6000W
Estimated by ADO on 10/29/2003
Elevation: 3280 feet Estimated by OWNER on 03/31/2003
Magnetic Variation: [8E (2014)]
Sectional: CHEYENNE
From City: 3nm E of Sturgis

Operations

Use: Private
Airspace Analysis: CONDITIONAL
Provided the Sponsor Request Another Review of the Site During Tourist Season; All Approach/Departure from 270 Degs to 360 Degs; Area is Marked; No Night Operations; Restrain Unauthorized Persons During Helo Operations by Using a Safety Barrier, Comply with Far Part 91.126(B)(2); and Mark and Light Any Obstructions.
Ownership: Privately owned
Activation: 06/2003
Control Tower: no
ARTCC: Denver Center (ZDV)
FSS: Huron FSS (HON)
Wind Indicator: Lighted
Landing Fee: no

Communications

Services

Based Aircraft

Helicopter GA: 1
Total: 1

Annual Operations

Total: 0

Ownership

Owner: Black Hill Aerial Adventures Inc.
620 West Blvd
Rapid City, Sd 57701
605-343-5058
Manager: Michael Jacob
620 West Blvd
Rapid City, Sd 57701
605-343-5058

Runways

Runways: H1

Runway H1

Length: 100 feet
by Owner on 03/03/2003
Width: 100 feet
Surface: Grass / Sod

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.