| XA42
Airport
|
Connies Aviation
|
|
Kaufman, Texas
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | XA42 |
| Lat/Lng: |
32.3755555556, -96.3870666667
32-22-32.0000N, 096-23-13.4400W
Estimated by OWNER on 01/13/2004
|
| Elevation: |
340 feet
Estimated
by OWNER
on 01/13/2004
|
| Magnetic Variation: |
[4E (2013)]
|
| Sectional: |
DALLAS-FT WORTH
|
| From City: |
12nm
S of Kaufman
|
| Use: |
Private
|
| Airspace Analysis: |
CONDITIONAL
Provided Traffic Pattern be Flown on the South Side of the Airport.
|
| Ownership: |
Privately owned
|
| Activation: |
03/2005
|
| Control Tower: |
no
|
| ARTCC: |
Fort Worth Center
(ZFW)
|
| FSS: |
Fort Worth FSS
(FTW)
|
| Wind Indicator: |
Unlighted
|
| Landing Fee: |
no
|
| Single Engine GA: |
3
|
| Total: |
3
|
|
|
| Owner: |
Arthur & Connie Akridge
18880 Cr 4072
Kemp, Tx 75143
903-498-6822
|
| Manager: |
Arthur Akridge
18880 Cr 4072
Kemp, Tx 75143
903-498-6822
|
|
Runway 09/27
| Length: |
1600 feet
by Owner on 01/13/2004
|
| Width: |
60 feet
|
| Surface: |
Grass / Sod, Good Condition
|
|
End 09 |
End 27 |
| Right Hand Pattern: |
Yes
|
|
| Runway Markings: |
Orange Cones Each Runway End.
|
|
| Objects: |
|
Powerline
|
| Object Marking: |
|
Marked
|
| Objects affecting Navigable Airspace (CFR part 77): |
Utility runway with a visual approach
|
Utility runway with a visual approach
|
| Object Height: |
|
30' AGL
|
| Object Distance: |
|
600' Along centerline
|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.