XS74
Airport
Diamondaire
Waco, Texas

FAA NFDC Information Effective 56-day cycle 04/03/2014 - 5/29/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:XS74
Lat/Lng: 31.6082194444, -97.1627805556
31-36-29.5900N, 097-09-46.0100W
Estimated by OWNER on 12/18/2002
Elevation: 424 feet Estimated by OWNER on 12/18/2002
Magnetic Variation: [4E (2014)]
Sectional: SAN ANTONIO
From City: 3nm N of Waco

Operations

Use: Private
Airspace Analysis: CONDITIONAL
Traffic Pattern Operations are Lmtd to East Side of Airport; Two-Way Radio Contact Shall be Made with Waco Approach Control; VFR; Owner Must Contact Waco ATCT Mgr Prior to Operations; Powerline on the North End Marked/Buried.
Ownership: Privately owned
Activation: 01/2003
Control Tower: no
ARTCC: Fort Worth Center (ZFW)
FSS: Fort Worth FSS (FTW)
Wind Indicator: Unlighted
Landing Fee: no

Communications

Services

Based Aircraft

Single Engine GA: 1
Total: 1

Annual Operations

Total: 0

Ownership

Owner: Claude R. Lindsey
100 E. Old Steinbeck Road
Waco, Tx 76708
254-379-6777
Manager: Claude R. Lindsey
100 E. Old Steinbeck Road
Waco, Tx 76708
254-379-6777

Runways

Runways: 15/33

Runway 15/33

Length: 2400 feet
by Owner on 12/18/2002
Width: 60 feet
Surface: Grass / Sod
End 15 End 33
Right Hand Pattern:   Yes
Objects: Powerline Powerline
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach

Procedures

NOTAMs

Additional Remarks


This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.