0ID
Airport
W E Ranch
Thatcher, Idaho

FAA NFDC Information Effective 56-day cycle 06/13/2024 - 8/8/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:0ID (Zero-India-Delta)
Lat/Lng:42.44818625, -111.777543056
42-26-53.4705N, 111-46-39.1550W
Estimated by Owner on 08/06/2018
Elevation:5075 feet Estimated by Owner
Magnetic Variation: [11E (2024)]
Sectional:SALT LAKE CITY
From City:3nm NW of Thatcher

Operations

Use:Open to the public
Ownership:Privately owned
Activation:08/2018
Control Tower:no
ARTCC:Salt Lake City(ZLC)Salt Lake City Center
FSS:Boise FSS(BOI)
NOTAMs and Weather:HUFNOTAM-D service at airport
Wind Indicator:Unlighted
Segmented Circle:yes
Landing Fee:no

Communications

CTAF:122.900

Services

Transient Storage:Tie-Down

Based Aircraft

Single Engine GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:W. E. Ranch, Llc
908 Francis Cir
Kaysville, Ut 84037
801 440 6204
Manager:W. E. Ranch, Llc
908 Francis Cir
Kaysville, Ut 84037
801 440 6204

Runways

Runways:17/35

Runway 17/35

Length:1350 feet
by Owner
Width:48 feet
Surface:Gravel
Surface Treatment:NONE
End 17 End 35
Right Hand Pattern:YesYes
Elevation at End:5075.0' MSL5070.0' MSL
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach

Procedures

NOTAMs

Additional Remarks

Owner Desires Airport be Charted.
Runway 17/35 Located on a Plateau; Sharp Drop Off Near Both Runway Ends.
No Winter Maintenance; Use at Own Risk.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.