62AR
Airport
Banks Ranch
Busch, Arkansas

FAA NFDC Information Effective 56-day cycle 05/23/2019 - 7/18/2019

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:62AR
Lat/Lng:36.4648138889, -93.8692833333
36-27-53.3300N, 093-52-09.4200W
Estimated by Faa-Est Imagery on 09/17/2018
Elevation:1061 feet Estimated by Owner on 09/13/2017
Magnetic Variation: [1E (2019)]
Sectional:KANSAS CITY
From City:2nm W of Busch

Operations

Use:Private
Ownership:Privately owned
Activation:09/2017
Control Tower:no
ARTCC:Memphis Center(ZME)
FSS:Jonesboro FSS(JBR)
Wind Indicator:Unlighted
Landing Fee:no

Communications

Services

Based Aircraft

Single Engine GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Blackhorn Land & Trading Llc
9300 West 110Th St, Suite 235
Overland Park, Ks 66210
913-451-7770
Manager:Todd Banks
21433 Hwy 62 West
Eureka Springs, Ar 72632
913-706-2213

Runways

Runways:08/26
17/35

Runway 08/26

Length:1500 feet
by Owner on 04/11/2018
Width:75 feet
Surface:Grass / Sod, Fair Condition
End 08 End 26
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach

Runway 17/35

Length:1100 feet
by Owner on 09/13/2017
Width:100 feet
Surface:Grass / Sod, Fair Condition
End 17 End 35
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach

Procedures

NOTAMs

Additional Remarks

Owner Desires Airport not be Charted

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.