D61
Airport
|
Towner Muni
|
Towner, North Dakota
|
|
|
|
FAA NFDC Information Effective 56-day cycle 12/26/2024 - 2/20/2025
FAA Identifier: | D61 (Delta-Six-One) |
---|
Lat/Lng: | 48.3594768889, -100.395525056 48-21-34.1168N, 100-23-43.8902W Estimated by Faa Oe/Aaa on 09/19/2024 |
---|
Elevation: | 1483 feet Estimated by Faa on 09/19/2024 |
---|
Magnetic Variation: | 09E,(1985), [5E (2024)] |
---|
Sectional: | TWIN CITIES |
---|
From City: | 1nm NE of Towner |
---|
Use: | Open to the public |
---|
Ownership: | Publicly owned |
---|
Activation: | 11/1937 |
---|
Control Tower: | no |
---|
ARTCC: | Minneapolis(ZMP)Minneapolis Center |
---|
FSS: | Grand Forks FSS(GFK) |
---|
NOTAMs and Weather: | GFKNOTAM-D service at airport |
---|
Wind Indicator: | Lighted |
---|
Lights: | Dusk-Dawn. Activate LIRL Runway 16/34 - CTAF. |
---|
Beacon: | Sunset-Sunrise |
---|
Landing Fee: | no |
---|
CTAF: | 122.800 |
---|
UNICOM: | 122.800 |
---|
Airframe Repair: | None |
---|
Powerplant Repair: | None |
---|
Transient Storage: | Hanger,Tie-Down |
---|
|
|
Owner: | Towner Airport Authority Po Box 330 Towner, Nd 58788 701-537-5137 |
---|
Manager: | Daniel Gunter Po Box 330 Towner, Nd 58788 701-537-3519 Adnl Contact Monte Hermanson 701-537-5849. |
---|
|
Runway 03/21
Length: | 2810 feet by Owner on 09/05/2024 |
---|
Width: | 120 feet |
---|
Surface: | Grass / Sod, Good Condition |
---|
Surface Treatment: | NONE |
---|
|
End 03 |
End 21 |
---|
Runway Markings: | 03/21 Marked 3 ft Wooden Red Mkrs on Ends & Intxn. | |
---|
Elevation at End: | 1476.0' MSL | 1484.0' MSL |
---|
Objects: | Road 25 ft Bldg 350 ft from Threshold 50 ft R of Extdd Centerline; Approach Ratio 14:1 | |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
Object Clearance Slope: | 3:1 | 50:1 |
---|
Object Height: | 17' AGL | |
---|
Object Distance: | 55' Along centerline 75' Right of centerline | |
---|
Runway 16/34
Length: | 2732 feet by Faa Oe/Aaa on 09/19/2024 |
---|
Width: | 150 feet |
---|
Surface: | Grass / Sod, Good Condition |
---|
Surface Treatment: | NONE |
---|
Runway Lights Edge Intensity: | Low Intensity |
---|
|
End 16 |
End 34 |
---|
Runway Markings: | 16/34 Marked 3 ft Wooden Red Mkrs on Ends & Intxn. | |
---|
Elevation at End: | 1483.0' MSL | 1476.0' MSL |
---|
Objects: | Road | Road +30' Powerline 1100 ft from Threshold on Centerline, Approach Ratio 36:1. |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
Object Clearance Slope: | 23:1 | 10:1 |
---|
Object Height: | 17' AGL | 17' AGL |
---|
Object Distance: | 400' Along centerline 250' Left of centerline | 175' Along centerline 125' Left of centerline |
---|
Runway H1
Length: | 30 feet |
---|
Width: | 30 feet |
---|
Surface: | Porland Cement Concrete, Good Condition |
---|
Surface Treatment: | NONE |
---|
• | A30-03/21-Has 5 ft Runway Visible Sight Clearance Violation. |
---|
• | 3' Ditch SE End of Runway 16/34 & SW End of Runway 03/21. |
---|
• | Runway 16/34 Has 50' Stopway NW End & 130' Stopway SE End. |
---|
• | Cfm Winter Condition After Snowstorm with Airport Manager 701-537-5137 or 701-537-3519. |
---|
• | Runway 03 Has 140 ft Water Tower 2000 ft from Threshold 600 ft L of Extdd Centerline. |
---|
• | for Cd Contact Minneapolis ARTCC at 651-463-5588. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.