MT59
Heliport
 King Copters
Corvallis, Montana

FAA NFDC Information Effective 56-day cycle 04/18/2024 - 6/13/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:MT59
Lat/Lng:46.3076388889, -114.111527778
46-18-27.5000N, 114-06-41.5000W
Estimated by Owner on 08/15/2012
Elevation:3496 feet Estimated by Owner on 08/15/2012
Magnetic Variation: [12E (2024)]
From City:1nm SE of Corvallis

Operations

Use:Private
Airspace Analysis:CONDITIONAL
Ownership:Privately owned
Activation:12/2016
Control Tower:no
ARTCC:Salt Lake City(ZLC)Salt Lake City Center
FSS:Great Falls FSS(GTF)
Wind Indicator:Lighted
Landing Fee:no

Communications

Services

Based Aircraft

Total:0

Annual Operations

Total:0

Ownership

Owner:J & J Excavating and Trucking Inc
1004 Eastside Hwy
Corvallis, Mt 59828
Manager:John King Jr.
1641 Eastside Hwy
Corvallis, Mt 59828
406-961-1511

Runways

Runways:H1

Runway H1

Length:500 feet
Width:500 feet
Surface:Grass / Sod
Surface Treatment:NONE

Procedures

NOTAMs

Additional Remarks

•for Cd Contact Salt Lake ARTCC at 801-320-2568.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.