FAA NFDC Information Effective 56-day cycle 11/09/2017 - 1/4/2018
|FAA Identifier:||O13 (Oscar-One-Three)|
Estimated by FAA-EST on 06/04/2006
|Magnetic Variation:||08E,(1985),[5E (2017)]|
|From City:||1nmSW of Erick|
|Use:||Open to the public|
|Airspace Analysis:||NOT ANALYZED|
Pre-Dates the Act.
|ARTCC:||Fort Worth Center(ZFW)|
|FSS:||Mc Alester FSS(MLC)|
|NOTAMs and Weather:||MLCNOTAM-D service at airport|
|Single Engine GA:||6|
|For year ending:||11/18/2014|
|Local GA (< 20 miles):||50|
|Owner:||City of Erick|
City Hall, P. O. Box 25
Erick, Ok 73645
Airport Board Chairman.
P. O. Box 330, P. O. Box 25
Erick, Ok 73645
|Surface:||Asphalt / Bituminous Concrete, Poor Condition|
Runway Surface Eroding & Rough with Severe Cracking, Raveling and General Deterioration.
|Weight Capacity:||Single Wheel aircraft: 4,000 lbs|
|True Alignment:||177,(172 Magnetic)||357,(352 Magnetic)|
|Gradient:||0.2 ||0.2 |
|Elevation at End:||2092.0' MSL||2097.0' MSL|
|Objects affecting Navigable Airspace (CFR part 77):||Utility runway with a visual approach||Utility runway with a visual approach|
|Object Clearance Slope:||20:1||20:1|
|Other Objects:||15 Ft Road at 80 Ft; 4 Ft Terrain Rise at 106 Ft, 8 Ft Fence at 120 Ft.||5 Ft Brush and Hill 168 Ft from Runway End.|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
Conditions of Use.