UT60
Heliport
Peoa Private
Peoa, Utah

FAA NFDC Information Effective 56-day cycle 05/16/2024 - 7/11/2024

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:UT60 (Uniform-Tango-Six-Zero)
Lat/Lng:40.7369805556, -111.357175
40-44-13.1300N, 111-21-25.8300W
Estimated by Owner on 12/10/2020
Elevation:6121 feet Estimated by Owner on 12/10/2020
Magnetic Variation: [11E (2024)]
Sectional:SALT LAKE CITY
From City:1nm NW of Peoa

Operations

Use:Private
Ownership:Privately owned
Activation:12/2020
Control Tower:no
ARTCC:Salt Lake City(ZLC)Salt Lake City Center
FSS:Cedar City FSS(CDC)
Wind Indicator:None
Landing Fee:no

Communications

CTAF:122.900

Services

Airframe Repair:None
Powerplant Repair:None
Bottled Oxygen:None
Bulk Oxygen:None

Based Aircraft

Helicopter GA:1
Total:1

Annual Operations

Total:0

Ownership

Owner:Drd Aviation, Llc
Po Box 2413
Park City, Ut 84060
435-640-8342
Manager:Drd Aviation, Llc
Po Box 2413
Park City, Ut 84060
435-640-8342

Runways

Runways:H1

Runway H1

Length:40 feet
by Owner on 12/10/2020
Width:40 feet
Surface:Pierced Steel Planking / Landing Mats / Membranes, Good Condition
Surface Treatment:NONE

Procedures

NOTAMs

Additional Remarks

Charting Requested in Asp Analysis.
Tlof Length 40 ft, Width 40 ft. Fato Length 70 ft, Width 280 ft. Ingress/Egress: 070/250 Degrees. Elev Ht of Surface: 1 ft.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.