VG34
Airport
|
Merifield
|
Clarksville, Virginia
|
|
|
|
FAA NFDC Information Effective 56-day cycle 12/26/2024 - 2/20/2025
FAA Identifier: | VG34 |
---|
Lat/Lng: | 36.5845858333, -78.5008322222 36-35-04.5090N, 078-30-02.9960W Estimated |
---|
Elevation: | 355 feet Surveyed |
---|
Magnetic Variation: | 07W,(1985), [-10W (2024)] |
---|
Sectional: | WASHINGTON |
---|
From City: | 3nm SE of Clarksville |
---|
Use: | Private |
---|
Airspace Analysis: | NOT ANALYZED Record Purposes only |
---|
Ownership: | Privately owned |
---|
Activation: | 11/1966 |
---|
Control Tower: | no |
---|
ARTCC: | Washington(ZDC)Washington Center |
---|
FSS: | Leesburg FSS(DCA) |
---|
Pattern Altitude: | 1155 MSL (800 AGL) |
---|
Wind Indicator: | Unlighted |
---|
Landing Fee: | no |
---|
Airframe Repair: | None |
---|
Powerplant Repair: | None |
---|
|
|
Owner: | Merifield Acres Landowners Meriwether Dr. Clarksville, Va 23927 (919) 846-8001 |
---|
Manager: | Rick Baldwin Meriwether Dr. Clarksville, Va 23927 (919) 846-8001 |
---|
|
Runway 15/33
Length: | 2375 feet |
---|
Width: | 75 feet |
---|
Surface: | Grass / Sod, Good Condition |
---|
Surface Treatment: | NONE |
---|
|
End 15 |
End 33 |
---|
Runway Markings: | Runway 15/33 Marked by White Metal Cones-Fair Condition | |
---|
Objects affecting Navigable Airspace (CFR part 77): | Utility runway with a visual approach | Utility runway with a visual approach |
---|
• | Approach Runway 33 and Departure Runway 15. |
---|
• | for Cd Contact Washington ARTCC at 703-771-3587. |
---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.