Alamogordo, New Mexico

FAA NFDC Information Effective 56-day cycle 09/14/2017 - 11/9/2017

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:52NM
Lat/Lng: 32.6338888889, -105.686388889
32-38-02.0000N, 105-41-11.0000W
Elevation: 6940 feet Estimated
Magnetic Variation: 11E, (1985), [8E (2017)]
From City: 21nm SE of Alamogordo


Use: Private
Airspace Analysis: CONDITIONAL
VFR Use only.
Ownership: Publicly owned
Activation: 02/1974
Control Tower: no
ARTCC: Albuquerque Center (ZAB)
FSS: Albuquerque FSS (ABQ)
Wind Indicator: Unlighted
Landing Fee: no



Airframe Repair: None
Powerplant Repair: None

Based Aircraft

Single Engine GA: 2
Total: 2

Annual Operations

Total: 0


Owner: Otero County
1101 New York Ave Room 106
Alamogordo, NM 88310
Manager: Timberon Airfield Co-Op
Po Box 416
Timberon, NM 88350
(505) 987-2680
Addl Amg Phone 915-755-1842.


Runways: 13/31

Runway 13/31

Length: 4950 feet
Width: 60 feet
Surface: Gravel / Cinders / Crushed Rock / Coral/Shells / Slag
Chip Seal Surface Treatment.
End 13 End 31
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach



Additional Remarks

Runway 13/31 Slopes 2 Deg's Downhill to the SE. Takeoffs Normally Made on Runway 13 & Ldgs on Runway 31.
Deer on Runway Especially at Twilight.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.