| AR31
Heliport
|
C. Andrew Laird
|
|
Sun City, Arizona
|
|
|
|
FAA NFDC Information Effective 56-day cycle 05/02/2013 - 6/27/2013
| FAA Identifier: | AR31 (Alpha-Romeo-Three-One) |
|---|
| Lat/Lng: |
33.6139277778, -112.272935
33-36-50.1400N, 112-16-22.5660W
Estimated
|
|---|
| Elevation: |
1140 feet
Estimated
|
|---|
| Magnetic Variation: |
13E,
(1985),
[11E (2013)]
|
|---|
| Sectional: |
PHOENIX
|
|---|
| From City: |
in Sun City
|
|---|
| Use: |
Private
|
|---|
| Airspace Analysis: |
No Objection.
|
|---|
| Ownership: |
Privately owned
|
|---|
| Activation: |
09/1981
|
|---|
| Control Tower: |
no
|
|---|
| ARTCC: |
Albuquerque Center
(ZAB)
|
|---|
| FSS: |
Prescott FSS
(PRC)
|
|---|
| Wind Indicator: |
None
|
|---|
| Landing Fee: |
no
|
|---|
| Helicopter GA: |
1
|
|---|
| Total: |
1
|
|---|
|
|
| Owner: |
C. Andrew Laird, M.D.
4950 E. Thomas Road
Phoenix, Az 85018
602-840-2345
|
|---|
| Manager: |
Plaza Del Rio
13460 North 94 Drive
Peoria, Az 85345
602-972-6185
|
|---|
|
Runway H1
| Length: |
30 feet
|
|---|
| Width: |
30 feet
|
|---|
| Surface: |
Asphalt / Bituminous Concrete
|
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
