NK24
Airport
Tilden
Montour Falls, New York

FAA NFDC Information Effective 56-day cycle 04/03/2014 - 5/29/2014

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks

Location

FAA Identifier:NK24
Lat/Lng: 42.3472955556, -76.8788477778
42-20-50.2640N, 076-52-43.8520W
Estimated
Elevation: 900 feet Estimated
Magnetic Variation: 11W, (1990), [-12W (2014)]
Sectional: NEW YORK
From City: 1nm NW of Montour Falls

Operations

Use: Private
Airspace Analysis: OBJECTIONABLE
Runway Surrounded on 3 Sides by High Terrain & on East Side by Trees; in One Location Runway only 25 Ft Wide; on West Side of Runway Embankment Too Close & a 325 Ft Tower is Located 0.3 Miles from Northeast End of Runway.
Ownership: Privately owned
Activation: 12/1993
Control Tower: no
ARTCC: New York Center (ZNY)
FSS: Buffalo FSS (BUF)
Wind Indicator: Lighted
Landing Fee: no

Communications

Services

Based Aircraft

Total: 0

Annual Operations

Total: 0

Ownership

Owner: Robert D. Tilden
3640 Cr 16
Montour Falls, Ny 14865
607-535-2217
Manager: Robert D. Tilden
3640 Cr 16
Montour Falls, Ny 14865
607-535-2217

Runways

Runways: 01/19

Runway 01/19

Length: 1600 feet
Width: 60 feet
Surface: Grass / Sod
End 01 End 19
Objects: Trees Ant
Objects affecting Navigable Airspace (CFR part 77): Utility runway with a visual approach Utility runway with a visual approach
Object Height: 50' AGL 326' AGL
Object Distance: 150' Along centerline 1584' Along centerline

Procedures

NOTAMs

Additional Remarks

Owner Desires Airport not be Charted.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.