| 0SD5
Heliport
|
The Fort
|
|
Custer, South Dakota
|
|
|
|
FAA NFDC Information Effective 56-day cycle 03/21/2024 - 5/16/2024
| FAA Identifier: | 0SD5 (Zero-Sierra-Delta-Five) |
|---|
| Lat/Lng: | 43.8063719444, -103.637139444
43-48-22.9390N, 103-38-13.7020W
Estimated |
|---|
| Elevation: | 5800 feet Estimated |
|---|
| Magnetic Variation: | 11E,(1990), [7E (2024)] |
|---|
| Sectional: | CHEYENNE |
|---|
| From City: | 3nm NW of Custer |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | CONDITIONAL
Provided Area is Fenced; Marked & Wind Ind Maintained. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 08/1994 |
|---|
| Attended: | May-Sep Every day 0900-1900 (local) |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Denver(ZDV)Denver Center |
|---|
| FSS: | Huron FSS(HON) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
| Fuel: | Jet A - Kerosene, freeze point -40C |
|---|
|
|
|
| Owner: | Fortified Inc Dba the Fort
Hwy 16 N
Custer, Sd 57730
605-673-4761 |
|---|
| Manager: | Jerome W Kutil
2040 W Main Suite 212
Rapid City, Sd 57702
605-341-5660 |
|---|
|
Runway H1
| Length: | 16 feet |
|---|
| Width: | 16 feet |
|---|
| Surface: | Porland Cement Concrete |
|---|
| Surface Treatment: | NONE |
|---|
| • | for Cd Contact Ellsworth Approach at 605-385-6198, When Approach Closed Contact Denver ARTCC at 303-651-4257. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
