Eagletail Ranch
Tonopah, Arizona

FAA NFDC Information Effective 56-day cycle 02/01/2018 - 3/29/2018

Ops Comms Services Owner Runways IFR Procs Current NOTAMs Remarks


FAA Identifier:99AZ
Lat/Lng:33.3955555556, -113.223055556
33-23-44.0000N, 113-13-23.0000W
Estimated by OWNER on 08/22/2003
Elevation:1203 feetEstimatedby OWNERon 08/22/2003
Magnetic Variation:[11E (2018)]
From City:18nmSW of Tonopah


Airspace Analysis:CONDITIONAL
See Revised Response Letter Dated 3/25/03.
Ownership:Privately owned
Control Tower:no
ARTCC:Albuquerque Center(ZAB)
FSS:Prescott FSS(PRC)
Wind Indicator:Unlighted
Landing Fee:no



Based Aircraft

Single Engine GA:2
Multi Engine GA:1
Helicopter GA:1

Annual Operations

Local GA (< 20 miles):10


Owner:Capt Michael Tragarz - Et Al
Addl Owners: Lyle Spargo, 54651 W. Sunland Ave, Tonopah Az 85354, Phone 602-421-4833
1043 W. Iris Drive
Gilbert, Az 85233
Manager:Michael Tragarz & Lyle Spargo
1043 W. Iris Drive
Gilbert, Az 85233



Runway 08/26

Length:3280 feet
Width:100 feet
Surface:Natural Soil
End 08 End 26
Right Hand Pattern:Yes 
Objects affecting Navigable Airspace (CFR part 77):Utility runway with a visual approachUtility runway with a visual approach



Additional Remarks

Aircraft Operations Should Avoid Conflict with Military Aircraft Operations As Low As 500 Ft AGL.
Aircraft Operations Remain South of Airport.
Contact M.P. Tragarz for Authorization to Ue Trip. Hold Harmle Document Required to be Signed.

This information is current as of the date at the top of the page. These pages are valid for all US airports, based on information from FAA National Flight Data Center. Weather information is provided based on AvnWx Data Sources. NOTAM information is from FAA's NAIMES data portal.

As with most information on this website, this page is generated based on FAA data, with automatic translations done via computer. You can also directly read the A/FD via the green icon link at the top of the page, which is the FAA text, and sometimes provides a different translation of codes. Please email me (using link at top-right of this page) if you see information which is confusing, misleading, or wrong....Or have suggestions for additions/changes.

Comments from the user community are clearly noted as such this page, are for informational purposes only, may be wrong and/or out-of-date, and must not be used as a sole source for critical decision making. See Privacy Policy and Conditions of Use.