| MT30
Airport
|
Trapper Creek Strip
|
|
Conner, Montana
|
|
|
|
FAA NFDC Information Effective 56-day cycle 10/03/2024 - 11/28/2024
| FAA Identifier: | MT30 (Mike-Tango-Three-Zero) |
|---|
| Lat/Lng: | 45.9401977778, -114.137029167
45-56-24.7120N, 114-08-13.3050W
Estimated |
|---|
| Elevation: | 4040 feet Estimated |
|---|
| Magnetic Variation: | 17E,(1985), [12E (2024)] |
|---|
| Sectional: | GREAT FALLS |
|---|
| From City: | 1nm NW of Conner |
|---|
| Use: | Private |
|---|
| Airspace Analysis: | NOT ANALYZED
Filed for Record Purposes only. |
|---|
| Ownership: | Privately owned |
|---|
| Activation: | 10/1980 |
|---|
| Control Tower: | no |
|---|
| ARTCC: | Salt Lake City(ZLC)Salt Lake City Center |
|---|
| FSS: | Great Falls FSS(GTF) |
|---|
| Wind Indicator: | Unlighted |
|---|
| Landing Fee: | no |
|---|
|
|
|
| Owner: | Don Wanstraph
Box 477
Darby, Mt 59829
406-821-3783 |
|---|
| Manager: | Don Wanstraph
Po Box 477
Darby, Mt 59829
(406) 821-3783 |
|---|
|
Runway 16/34
| Length: | 1470 feet |
|---|
| Width: | 60 feet |
|---|
| Surface: | Grass / Sod |
|---|
| Surface Treatment: | NONE |
|---|
|
End 16 |
End 34 |
|---|
| Objects: | Trees | Trees |
|---|
| Object Distance: | 1000' Along centerline | 1000' Along centerline |
|---|
| • | Watch for Water on Runway. |
|---|
| • | for Cd Contact Salt Lake ARTCC at 801-320-2568. |
|---|
This information is current as of the date at the top of the page. These
pages are valid for all US airports, based on information from FAA National Flight Data Center.
Weather information
is provided based on AvnWx Data Sources. NOTAM information
is from FAA's NAIMES data portal.
As with most information on this website, this page is generated based on FAA data, with
automatic translations done via computer. You can also directly read the A/FD via
the green icon link at the top of the page, which is the FAA text, and
sometimes provides a different translation of codes. Please email
me (using link at top-right of this page) if you see information which is confusing,
misleading, or wrong....Or have suggestions for additions/changes.
Comments from the user community are clearly noted as such this page, are for informational purposes only, may
be wrong and/or out-of-date, and must not be used as a sole source
for critical decision making. See Privacy Policy and
Conditions of Use.
